Re: ANTS on Janos

[adotl <adotl@lion.cc>]

Hi there!

somehow the image works (except for when I het the very long trace) an it 
sends capsules OK (I can see it on the switch console) 

but the same Image running on another node is NOT able to receive packets :(

it just blocks with :
ANTS v2.0
Reading route table 'video.routes' for node 18.31.12.2
addrSpec: 0x00902728a276
protoSpec: if0
addrSpec: 0x00902728a276
protoSpec: if0
addrSpec: 0x00902728a33e
protoSpec: if0
OK!RouteEntry[d=18.31.12.1;a=Address[anAddr=18.31.12.1; ProtocolSpec=if0; 
AddressSpec=0x00902728a33e]]
addrSpec: 0x009027a71bad
protoSpec: if0
OK!RouteEntry[d=18.31.12.3;a=Address[anAddr=18.31.12.3; ProtocolSpec=if0; 
AddressSpec=0x009027a71bad]]
Before the require in flowSubscribe()
BEfore the return in flowSubscribe()
flow != null in flowResourceFixupCurrent.
frc != null in flowResourceFixupCurrent.
Before the require in flowSubscribe()
BEfore the return in flowSubscribe()
flow != null in flowResourceFixupCurrent.
frc != null in flowResourceFixupCurrent.

These last printfs are in libraries/extensions/nodeos/clib/flowResource.c of 
the JanosVM...

Where does the receive actually happen ? I'd like to see if it is getting 
something at all or not...

cheers